HDPE Fittings

HDPE Fittings Manufacturer

Ambica Machine Tools manufactures HDPE fittings with a pressure rating up to PN10 for water, wastewater, chemical and industrial piping. The range includes bends, tees, reducers, end caps, slip-on, blind, sandwich and weld neck flanges, stub ends and tail pieces in sizes from 20 mm OD up to 500 mm OD.

Get a Quote

Bends, Tees, Reducers & End Caps – HDPE Fittings

01 Bend (10 Kg.) HDPE fittings manufacturer in India

Bend (10 Kg.)

Size Range20 mm OD to 315 mm OD
Pressure10 Kg.
MaterialHDPE
02 Tee (10 Kg.) HDPE fittings manufacturer in India

Tee (10 Kg.)

Size Range20 mm OD to 315 mm OD
Pressure10 Kg.
MaterialHDPE
03 Reducer HDPE fittings manufacturer in India

Reducer

Size Range32 mm OD to 315 mm OD
PressureUp to PN10
MaterialHDPE
04 End Cap HDPE fittings manufacturer in India

End Cap

Size Range63 mm OD to 315 mm OD
PressureUp to PN10
MaterialHDPE

HDPE Flanges – Pressure Rating Up to PN10

05 Slip-on Flange HDPE fittings manufacturer in India

Slip-on Flange

Size Range20 mm OD to 500 mm OD
PressureUp to PN10
MaterialHDPE
06 Blind Flange HDPE fittings manufacturer in India

Blind Flange

Size Range20 mm OD to 500 mm OD
PressureUp to PN10
MaterialHDPE
07 Sandwich Flange HDPE fittings manufacturer in India

Sandwich Flange

Size Range32 mm OD to 500 mm OD
PressureUp to PN10
MaterialHDPE
08 Weld Neck Flange HDPE fittings manufacturer in India

Weld Neck Flange

Size Range75 mm OD to 500 mm OD
PressureUp to PN10
MaterialHDPE

Stub Ends & Tail Pieces – Pressure Rating Up to PN10

09 Long Neck Stub End HDPE fittings manufacturer in India

Long Neck Stub End

Size Range20 mm OD to 500 mm OD
PressureUp to PN10
MaterialHDPE
10 Short Neck Stub End HDPE fittings manufacturer in India

Short Neck Stub End

Size Range20 mm OD to 500 mm OD
PressureUp to PN10
MaterialHDPE
11 Tail Piece With Flange HDPE fittings manufacturer in India

Tail Piece With Flange

Size Range32 mm OD to 160 mm OD
PressureUp to PN10
MaterialHDPE
12 Tail Piece HDPE fittings manufacturer in India

Tail Piece

Size Range32 mm OD to 160 mm OD
PressureUp to PN10
MaterialHDPE

Types of HDPE Fittings

Bends, Tees, Reducers & End Caps

Our HDPE bends, tees, reducers and end caps are used for changing direction, branching, changing pipe size and closing line ends in HDPE piping systems.

Key Features of Bends, Tees & Reducers

  • Bends and tees from 20 mm to 315 mm OD in 10 Kg. rating.
  • Reducers from 32 mm to 315 mm OD.
  • End caps from 63 mm to 315 mm OD.

HDPE Flanges

Our HDPE flanges are used to connect HDPE pipelines to valves, pumps and equipment, and are available in several styles for different joints.

Key Features of HDPE Flanges

  • Slip-on and blind flanges from 20 mm to 500 mm OD.
  • Sandwich flanges from 32 mm to 500 mm OD.
  • Weld neck flanges from 75 mm to 500 mm OD.

Stub Ends & Tail Pieces

Our stub ends and tail pieces are used with flanges to join HDPE pipes to flanged connections.

Key Features of Stub Ends & Tail Pieces

  • Long neck and short neck stub ends from 20 mm to 500 mm OD.
  • Tail pieces and tail pieces with flange from 32 mm to 160 mm OD.
  • Pressure rating up to PN10.

Benefits of HDPE Fittings

HDPE fittings are an excellent choice for a variety of piping applications due to their many advantages. Here are the key benefits:

  • Versatile Applications: HDPE piping is used for potable water, slurries, wastewater, chemicals, compressed gases and oils.
  • Wide Size Range: Fittings are available from 20 mm OD up to 500 mm OD for small and large pipelines.
  • Complete Range: Bends, tees, reducers, end caps, flanges, stub ends and tail pieces are available in one place.
  • Pressure Rating: HDPE fittings are rated up to PN10 for general industrial use.
  • Matching Pipes and Valves: We also supply HDPE pipes and HDPE ball valves for a complete system.

These advantages make HDPE fittings a great solution for reliable and long-lasting piping in demanding environments.

We are achived

Our Certificates

Need we say more about the authorization of our brand?

Our Trusted Client

Why Choose Ambica Machine Tools for HDPE Fittings

20+ Years of Experience

For over two decades, we have supplied HDPE fittings, pipes, valves and industrial products to industries that need dependable piping for water and chemical lines.

CE & ISO Certified

Our manufacturing and quality processes follow applicable quality and compliance requirements, with relevant CE and ISO certifications available for our products and operations.

400+ Product Range

As an HDPE fittings manufacturer in India, we offer bends, tees, reducers, end caps, flanges, stub ends and tail pieces, along with HDPE pipes and ball valves, so you can source your complete system from one place.

Superior Quality & QC Practiced at All Levels

We maintain strict quality control at every step, from raw material to final inspection, so every HDPE fitting meets high standards of durability and performance up to PN10.

10,000+ Happy Clients

More than 10,000 clients worldwide trust our products and our support, valuing long-lasting performance and dependable quality.

Trusted by Leading Clients

As a trusted HDPE fittings supplier, we serve clients across water, wastewater, chemical and industrial piping applications.

Frequently Asked Questions on HDPE Fittings

What types of HDPE fittings do you offer?

We offer bends, tees, reducers, end caps, slip-on, blind, sandwich and weld neck flanges, long neck and short neck stub ends, tail pieces and tail pieces with flange.

What is the pressure rating of your HDPE fittings?

Our HDPE fittings are rated up to PN10. Bends and tees are available in 10 Kg. rating.

What size range do your HDPE fittings come in?

Sizes range from 20 mm OD up to 500 mm OD, depending on the fitting. For example, bends and tees are available from 20 mm to 315 mm OD, flanges and stub ends up to 500 mm OD, and tail pieces from 32 mm to 160 mm OD.

What flange types are available?

We offer slip-on flanges and blind flanges (20 mm to 500 mm OD), sandwich flanges (32 mm to 500 mm OD) and weld neck flanges (75 mm to 500 mm OD). Stub ends with flanges are available in long neck and short neck types.

What is the difference between a stub end and a tail piece?

Both are used with flanges to connect HDPE pipes to flanged connections. We offer long neck and short neck stub ends from 20 mm to 500 mm OD, and tail pieces and tail pieces with flange from 32 mm to 160 mm OD. Our team can help you choose the right option for your joint.

What applications are HDPE fittings used for?

HDPE piping is used for carrying potable water, slurries, hazardous wastes, wastewater, cables, chemicals, compressed gases and oils.

Do you also supply HDPE pipes?

Yes. We supply HDPE pipes from 20 mm OD to 315 mm OD under the brand name PARTHIV, in PE-63, PE-80 and PE-100 grades as per IS 4984-2016, with a pressure rating of PN 2.5 to PN 10.

Do you supply HDPE valves?

Yes. We supply HDPE ball valves from 1/2" to 12", so you can source valves and fittings from one place.

How do I choose the right HDPE fitting for my needs?

Choose based on your pipe size, pressure requirement, the liquid or gas being carried and the type of joint needed. Share these details with us and we will help you select the right fitting.

Are you looking for quality FAP Lined Valves, Pipes and fittings, Air Operated Double Diaphragm (AODD) pumps, barrel and drum pumps, magnetic drive process pumps, and industrial valves? If yes, we are always eager to assist you!

Talk To Our Experts
×