Polypropylene/PVDF Process Pump AMTPP Series

AMTPP Series Polypropylene/PVDF Process Pump
The AMTPP series polypropylene/PVDF process pump is a horizontal, single-stage centrifugal pump with molded polypropylene wetted parts. It is built to move acids, chemicals and other corrosive liquids where metal pumps corrode quickly.
It handles flows up to 80 m³/hr in sizes from 15 to 150 mm, with a choice of mechanical seal or PTFE gland packing. Ambica Machine Tools supplies the range as a polypropylene pump manufacturer in India.
80 M³/HR
Capacity Up To
60 M
Total Head Up To
15–150 MM
Pump Size Range
110°C
Temperature Up To
AMTPP Series Polypropylene/PVDF Process Pump Technical Specifications
|
Parameter
|
AMTPP Series
|
| Pump Type |
Horizontal Single-Stage Centrifugal Pump
|
| Construction |
Molded Polypropylene
|
| Capacity |
Up to 80 m³/hr
|
| Total Delivery Head |
Up to 6 m
|
| Pump Size |
15–150 mm
|
| Speed (50 Hz) |
1440 / 2880 RPM
|
| Speed (60 Hz) |
1750 / 3500 RPM
|
| Maximum Temperature |
Up to 110°C (depends on material)
|
Corrosion-Resistant Polypropylene/PVDF Process Pump for Industrial Duty
The AMTPP series is a horizontal single-stage pump whose casing, impeller and cover are molded from plastic. Since the liquid never touches bare metal, it suits acids, alkalis and chemicals that would eat into a steel pump.
It is used for chemical transfer, acid transfer, water treatment, effluent treatment and general process lines. The sealing can be chosen to match your liquid, temperature and duty.
Because plastic does not suit every liquid, please share your liquid name, concentration, temperature, flow and head, and our team will confirm the right model and material.
SERIES
AMTPP
Built for Corrosive Process Liquids
- Molded polypropylene wetted parts
- PP, PPH, PVDF and UHMW options
- Mechanical seal or PTFE gland packing
- Up to 80 m³/hr, 15–150 mm sizes
AMTPP Series Pump Models
Model No. |
Suction (mm) |
Discharge (mm) |
Impeller OD (mm) |
Duty 1 H(m) / Q(m³/h) |
Duty 2 H(m) / Q(m³/h) |
Duty 3 H(m) / Q(m³/h) |
Duty 4 H(m) / Q(m³/h) |
Duty 5 H(m) / Q(m³/h) |
Duty 6 H(m) / Q(m³/h) |
Motor HP / kW |
Motor RPM |
| AMTPP-100 | 25 | 25 | 100 | 12 / 0 | 10 / 3 | 9 / 5 | 7 / 8 | 6 / 10 | 4 / 12 | 1.0 / 0.75 | 2880 |
| AMTPP-120 | 40 | 25 | 120 | 16 / 0 | 15 / 4 | 13 / 8 | 11 / 10 | 7 / 15 | 5 / 19 | 2.0 / 1.5 | 2880 |
| AMTPP-130 | 50 | 40 | 148 | 25 / 0 | 25 / 5 | 21 / 8 | 17 / 13 | 14 / 18 | 9 / 22 | 3.0 / 2.2 | 2880 |
| AMTPP-160R | 50 | 50 | 145 | 23 / 0 | 20 / 5 | 18 / 9 | 15 / 15 | 10 / 22 | 5 / 25 | 3.0 / 2.2 | 2880 |
| AMTPP-160 | 75 | 40 | 160 | 30 / 0 | 27 / 5 | 25 / 8 | 20 / 18 | 15 / 26 | 10 / 30 | 5.0 / 3.5 | 2880 |
| AMTPP-170 | 75 | 50 | 170 | 33 / 0 | 30 / 7 | 25 / 20 | 20 / 35 | 15 / 40 | 10 / 50 | 7.5 / 5.5 | 2880 |
| AMTPP-50 | 75 | 40 | 205 | 14 / 0 | 13 / 5 | 12 / 10 | 11 / 20 | 10 / 25 | 5 / 30 | 3.0 / 2.2 | 1440 |
| AMTPP-55 | 75 | 50 | 210 | 16 / 0 | 15 / 5 | 14 / 15 | 12 / 30 | 10 / 40 | 6 / 45 | 5.0 / 3.5 | 1440 |
| AMTPP-40 | 50 | 40 | 190 | 50 / 0 | 45 / 10 | 40 / 25 | 35 / 30 | 30 / 35 | 25 / 40 | 12.5 / 9.3 | 2880 |
| AMTJPP-55 | 50 | 50 | 210 | 60 / 0 | 55 / 15 | 50 / 25 | 45 / 35 | 35 / 50 | 30 / 68 | 15.0 / 11.0 | 2880 |
Each duty point shows Head (m) / Capacity (m³/h). A capacity of 0 means the shut-off head. Data is for water. Share your liquid, flow and head with our team, and we will suggest the right model.
Sealing Options for Different Process Duties
The seal is the part that decides how long a chemical pump runs without leaking, so it should match your liquid and temperature. The AMTPP series offers three arrangements.
A mechanical seal with ceramic, GFT or silicon faces and Teflon or GFT bellows suits most acid and chemical jobs. An externally mounted mechanical seal is an option for harsher duty. PTFE impregnated graphite gland packing is available for continuous industrial use.
Tell us your liquid, temperature and pressure, and our team will recommend the seal.
SEALING
3 Options
Choose by Application
- Mechanical seal (ceramic / GFT / silicon faces)
- Externally mounted mechanical seal
- PTFE impregnated graphite gland packing
Material Selection by Temperature
50–80°C
PP (Polypropylene)
90–100°C
PPH (Homopolymer)
100–115°C
PVDF
These ranges are a guide. The actual limit depends on the liquid, pressure and seal, so please confirm with our team.
AMTPP Series Key Features

Molded PP Wetted Parts
Casing, impeller and cover are molded plastic, so the liquid never touches bare metal.

Wide Chemical Resistance
Handles many acids, alkalis and corrosive liquids when the material is chosen correctly.

Seal Choice for Your Liquid
Pick a mechanical seal or PTFE gland packing to suit your duty.

Made for Continuous Duty
Built for daily process work in chemical plants, water treatment and effluent lines.
AMTPP Series Material of Construction
|
Component
|
Available Material
|
| Casing |
Molded PP / PVDF / UHMW
|
| Impeller |
Molded PP / PVDF / UHMW
|
| Casing Cover |
Molded PP / PVDF / UHMW
|
| Shaft Sleeve |
Ceramic / Alloy-20
|
| Bearing Housing |
Cast Iron / Cast Steel
|
| Shaft |
EN-9 / SS 304 / SS 316
|
NEED A POLYPROPYLENE PROCESS PUMP?
Get a Quote for the AMTPP Series Pump
Share your liquid, flow rate, head and temperature. Our team will suggest the right model and send you a quote.
+91 93282 89287
Applications of AMTPP polypropylene/PVDF process Pump
The AMTPP series polypropylene/PVDF process pump is assembled with specified materials and components for pressure testing applications.
Water Treatment Plants
Chemical dosing and transfer in water treatment systems.
Effluent Treatment Plants
Moves corrosive liquids through industrial effluent treatment.
Chemical Industries
Handles acids, chemicals and corrosive process fluids.
Fertilizer Plants
Corrosive liquid handling in fertilizer process lines.
Pharmaceutical Industries
Transfer of process chemicals and fluids in pharma units.
Paper and Pulp Plants
Moves corrosive chemicals and process liquids.
Pickling Plants
Acid and chemical transfer in metal treatment lines.
Caustic Soda Plants
Chemical handling where corrosion-resistant construction is needed.
Gas Scrubbing
Circulates scrubbing liquid for corrosive gases such as chlorine, ammonia and sulphur dioxide.
Descaling Applications
Chemical circulation for descaling tubes and industrial equipment.
Vacuum Ejector Systems
Process liquid circulation in ejector and related duties.
Acid Transfer
Transfers compatible acids such as HCl, after a material check.
Countries We Serve
Qatar Kuwait UAE Singapore Libya Tanzania Oman Nepal Uzbekistan Indonesia Qatar Kuwait UAE Singapore Libya Tanzania Oman Nepal Uzbekistan Indonesia



















Why Choose Us for AMTPP series polypropylene/PVDF process pump?
20+ Years Of Expertise
We have two decades of experience in solving high-pressure flow problems.
Corrosion-Resistant Build
Molded polypropylene parts give a practical answer to corrosive liquid handling.
ISO-Certified Quality
Our making process follows strict international quality rules.
Seal Matched to Your Duty
Mechanical seal and gland packing options let us fit the pump to your process.
Custom Builds
We can change the ends or materials to match what your project needs.
Material Guidance
Share your liquid and temperature, and we will suggest PP, PPH, PVDF or UHMW.
What Our Clients Say
We use Ambica's AMTPP polypropylene process pump for transferring acids and other corrosive chemicals in our plant. The PP construction handles these chemicals well, and the pump has run steadily with very little maintenance.
Dinesh Parmar
Ankleshwar
We needed a corrosion resistant pump for our chemical processing line. The AMTPP series gives a smooth, steady flow and the mechanical seal has held up well. Ambica's team helped us choose the right model for our application.
Pradeep Kulkarni
Pune
The pump arrived with secure packing and was ready to install. The polypropylene casing and impeller look well made and finished. We are happy with the supply and plan to order more.
Faisal Al-Rashid
Muscat, Oman
We run this pump in our process area for daily chemical handling. It is easy to install and operate, and it is much lighter than the metal pumps we used before. A very practical pump for regular use.
Mark Thompson
UK
Frequently Asked Questions for AMTPP series polypropylene/PVDF process Pump
It is a horizontal, single-stage centrifugal pump with molded polypropylene wetted parts. It is made to transfer acids, chemicals and other corrosive liquids in process plants.
The series covers flows up to 80 m³/hr in pump sizes from 15 to 150 mm. Total delivery head goes up to 6 m. Share your duty point and we will suggest a model.
PP suits many acids and alkalis at moderate temperatures (about 50–80°C). PPH, a homopolymer, handles somewhat higher temperature (90–100°C). PVDF handles stronger chemicals and higher temperature (100–115°C). Share your liquid and temperature for the right choice.
You can choose a mechanical seal with ceramic, GFT or silicon faces, an externally mounted mechanical seal, or PTFE impregnated graphite gland packing. The right one depends on the liquid and operating conditions.
It can handle many acids, including HCl, when the material and seal are compatible with the concentration and temperature. Please confirm with our team before ordering.
It runs at 1440 or 2880 RPM on a 50 Hz supply, and 1750 or 3500 RPM on a 60 Hz supply.
It is used in chemical plants, water and effluent treatment, fertilizer, pharmaceutical, paper and pulp, pickling, caustic soda and gas scrubbing applications.
Yes. Ambica Machine Tools supplies across India and overseas with secure packing and export documentation. Contact us with your location and quantity for a quote.
Are you looking for quality FAP Lined Valves, Pipes and fittings, Air Operated Double Diaphragm (AODD) pumps, barrel and drum pumps, magnetic drive process pumps, and industrial valves? If yes, we are always eager to assist you!
Talk To Our Experts








