Hand Operated Hydro Testing Pump AMTH-70

AMTH-70 Hand Operated Hydro Testing Pump
The AMTH-70 hand operated hydro testing pump is built for higher pressure hydrostatic testing of pipelines, valves, pressure vessels, boilers and tanks. It works by hand, so it needs no electricity and can be used on site.
It gives a maximum pressure of 70 Kg/cm² (1000 PSI) with an output of 15.70 CC per stroke and an 18 litre water tank. It has a stainless steel 316 plunger, stainless steel 304 components and a mild steel tank. Ambica Machine Tools supplies it as a hydro test pump manufacturer in India.
70 Kg/Cm²
Max. Pressure (1000 PSI)
15.70 CC
Output Per Stroke
18 L
Water Tank
SS 316
Pump Plunger
AMTH-70 Technical Specifications
|
Specification
|
Details
|
| Model |
AMTH – 70
|
| Pump Type |
Hand Operated Hydro Testing Pump
|
| Maximum Pressure |
70 Kg/Cm² (1000 PSI)
|
| Output |
15.70 CC / Stroke
|
| Plunger Size |
22 mm
|
| Pump Plunger Material |
Stainless Steel 316
|
| Water Tank Capacity |
18 Ltrs.
|
| Water Tank Material |
Mild Steel
|
| Water Tank Gauge Size |
16 Gauge
|
| Water Tank Thickness |
1.6 mm
|
| Pressure Release Cock |
S.S. 304 Material, Needle Type Valve
|
| Discharge Pressure Hose |
3/8″ hose with 1/2″ BSP attachment, length 2 Mtrs.
Pipe make: PARKER |
| Low Pressure PCV Braided Hose |
For pressure relief valve, size 1/4″ with 1/4″ connection, length 0.5 Mtrs.
|
| Pressure Gauge |
Glycerin filled, Stainless Steel 304, 4″ with calibration certificate
|
| NRV |
Stainless Steel 304
|
| Suction Pipe & Foot Valve |
Stainless Steel 304
|
| Distributor Block |
Stainless Steel 304
|
| Pump Handle |
Mild Steel, single piece handle
|
| Pump Paint |
Full powder coated, blue colour
|
AMTH-70 Hand Operated Hydro Testing Pump for Pressure Testing
The AMTH-70 is a hand operated hydro testing pump designed for hydrostatic pressure testing at higher pressure. It gives a maximum pressure of 70 Kg/cm², equal to 1000 PSI.
It delivers 15.70 CC per stroke through a 22 mm plunger and carries an 18 litre water tank, so you can run longer tests without refilling and without any electric supply.
The pressure release cock, NRV, suction pipe, foot valve and distributor block are made of stainless steel 304, and the plunger is stainless steel 316.
The pump comes with a glycerin filled stainless steel 304 pressure gauge supplied with a calibration certificate, and a PARKER discharge pressure hose.
MODEL NO.
AMTH – 70
Hand Operated Hydro Testing Pump
- 70 Kg/cm² (1000 PSI) maximum pressure
- 15.70 CC output per stroke
- 22 mm stainless steel plunger
- 18 litre water tank
- SS 304 components
- SS 316 pump plunger
- Glycerin filled pressure gauge
- Calibration certificate for gauge
Standard Components for AMTH-70
The AMTH-70 is assembled with specified materials and components for pressure testing. Each part has a clear job in the test circuit.
The needle type release cock lets you release pressure in a controlled way after the test. The NRV holds the pressure in the line, and the distributor block connects the gauge and hoses.
The 2 metre PARKER hose carries the pressure to the item under test, and the 0.5 metre low pressure braided hose serves the pressure relief valve.
MAX. PRESSURE
70
Kg/cm² Hydro Testing Pump
- S.S. 304 needle type pressure release cock
- PARKER 3/8″ discharge pressure hose
- Low pressure PCV braided hose
- S.S. 304 glycerin filled pressure gauge
- S.S. 304 NRV
- S.S. 316 pump plunger
- S.S. 304 suction pipe & foot valve
- S.S. 304 distributor block
AMTH-70 Key Features

70 Kg/Cm² Pressure
Designed for a maximum pressure of 70 Kg/cm², equal to 1000 PSI.

15.70 CC Output
Gives 15.70 CC of output per stroke for pressure testing work.

SS 316 Plunger
The 22 mm pump plunger is made of stainless steel 316.

SS 304 Components
Release cock, NRV, suction pipe, foot valve and distributor block are in stainless steel 304.

18 Litre Water Tank
An 18 litre mild steel tank holds the test water.

Glycerin Pressure Gauge
Supplied with a 4″ glycerin filled stainless steel 304 pressure gauge.

PARKER Pressure Hose
3/8″ discharge hose with 1/2″ BSP attachment and 2 metre length.

Powder Coated Body
The pump is finished with full powder coating in blue colour.
AMTH-70 Material of Construction
The AMTH-70 uses different materials for its specified parts. The pump plunger is made of stainless steel 316. The pressure release cock, NRV, suction pipe, foot valve and distributor block are made of stainless steel 304.
The water tank is mild steel, 16 gauge with 1.6 mm thickness, and the handle is a single piece mild steel handle. The pump is finished with full powder coating in blue colour.
The pressure gauge is a 4″ glycerin filled stainless steel 304 gauge, supplied with a calibration certificate.
AMTH-70 M.O.C.
304 / 316
Pump Material Construction
- SS 316 pump plunger
- SS 304 pressure release cock
- SS 304 NRV
- SS 304 suction pipe & foot valve
- SS 304 distributor block
- Mild steel water tank
NEED A HAND OPERATED HYDRO TESTING PUMP?
Get a Quote for the AMTH-70 Hydro Testing Pump
Share the item you want to test and the test pressure. Our team will confirm the right pump and send you a quote.
+91 93282 89287
Applications of AMTH-70 Hand Operated Hydro Testing Pump
The AMTH-70 is assembled with specified materials and components for pressure testing applications.
Pipeline Testing
Checks pipelines for leaks and pressure holding by hydrostatic test.
Valve Testing
Tests valves for body and seat tightness before they go into service.
Pressure Vessel Testing
Hydro tests pressure vessels to confirm they hold the required pressure.
Boiler Testing
Used for hydrostatic testing of boilers and their pressure parts.
Tank Testing
Tests tanks and other closed containers for leaks under pressure.
Industrial and Field Testing
Hand operated and portable, so it suits testing of other industrial components on site.
Benefits of the AMTH-70
No Electricity Needed
Hand operated design works anywhere, on site or in the workshop.
Tests Up to 1000 PSI
Suited to hydrostatic tests up to 1000 PSI (70 Kg/cm²).
Stainless Steel Plunger
The SS 316 plunger is built for repeated pressure testing.
SS 304 Key Parts
Important flow parts are specified in stainless steel 304.
Bigger 18 Litre Tank
Mild steel tank of 1.6 mm thickness holds more water for longer tests.
Calibrated Gauge
The pressure gauge comes with a calibration certificate.
Powder Coated Finish
Full powder coated body in blue colour.
Single Piece Handle
A mild steel single piece handle makes pumping simple.
Why Choose Us for AMTH-70 Hand Operated Hydro Testing Pump?
20+ Years Of Expertise
We have two decades of experience in solving high-pressure flow problems.
Strict Testing
Every valve gets water and air pressure tests before we send it to you.
ISO-Certified Quality
Our making process follows strict international quality rules.
Fair Prices
As a direct manufacturer, we offer competitive and fair pricing while maintaining high engineering quality.
Custom Builds
We can change the ends or materials to match what your project needs.
Fast Shipping
We work quickly to meet your deadlines across India and for international exports.
Countries We Serve
Qatar Kuwait UAE Singapore Libya Tanzania Oman Nepal Uzbekistan Indonesia Qatar Kuwait UAE Singapore Libya Tanzania Oman Nepal Uzbekistan Indonesia



















What Our Clients Say
We use Ambica's AMTH-70 hand operated hydro test pump for pressure testing of pipelines and valves at our site. It works without electricity, and the 18 litre tank lets us finish a test without refilling. The gauge came with a calibration certificate.
Dinesh Parmar
Ankleshwar
We needed a hand pump that can reach 1000 PSI for testing pressure vessels. The AMTH-70 builds pressure steadily, and the needle type release cock lets us release it in a controlled way. Ambica's team helped us choose the right model.
Pradeep Kulkarni
Pune
The pump arrived with secure packing and a gauge with its calibration certificate. The PARKER hose and stainless steel fittings look well made. We are happy with the supply and plan to order more.
Faisal Al-Rashid
Muscat, Oman
We carry this pump to different locations for field testing. It is easy to set up, and the single piece handle makes pumping simple. A very practical pump for regular testing work.
Mark Thompson
UK
Frequently Asked Questions for AMTH-70 Hand Operated Hydro Testing Pump
The AMTH-70 is a hand operated pump used for hydrostatic pressure testing. You pump by hand to fill and pressurise the item under test, so no electricity is needed.
The maximum pressure is 70 Kg/cm², which is 1000 PSI. Please keep the test pressure of your item within this rating.
The AMTH-70 gives 15.70 CC per stroke through a 22 mm plunger.
The plunger is stainless steel 316. The pressure release cock, NRV, suction pipe, foot valve and distributor block are stainless steel 304. The water tank and handle are mild steel, and the pump is powder coated in blue.
The water tank holds 18 litres. It is made of mild steel, 16 gauge, with 1.6 mm thickness.
Yes. It comes with a 4 inch glycerin filled stainless steel 304 pressure gauge with a calibration certificate, and a 2 metre PARKER 3/8 inch discharge hose with 1/2 inch BSP attachment.
The AMTH-35 gives up to 35 Kg/cm² (500 PSI) and has a 12 litre tank. The AMTH-70 gives up to 70 Kg/cm² (1000 PSI) and has an 18 litre tank. Choose the model that matches the test pressure of your item.
Yes. Ambica Machine Tools supplies across India and overseas with secure packing and export documentation. Contact us with your location and quantity for a quote.
Are you looking for quality FAP Lined Valves, Pipes and fittings, Air Operated Double Diaphragm (AODD) pumps, barrel and drum pumps, magnetic drive process pumps, and industrial valves? If yes, we are always eager to assist you!
Talk To Our Experts








